Dirty, leaky ducts waste energy and continuously recirculate dust, mold, and allergens through your home. Bayside's NADCA-compliant HEPA duct cleaning restores your indoor air quality and system efficiency — with before-and-after photos on every job.
Your duct system circulates all the air in your home 5–7 times every day. Over years of use, ducts accumulate dust, pet dander, mold spores, pollen, and other contaminants that are continuously recirculated through your living spaces. In Florida's humid climate, moisture inside ducts leads to mold growth that affects both your family's health and your HVAC efficiency. The EPA's Indoor Air Quality Division has documented that hazardous allergens in some indoor environments can exceed outdoor levels by up to 70%.
Bayside's professional duct cleaning uses the Nikro PDC2400 — a certified true HEPA system — with NADCA-compliant negative-pressure equipment to remove contaminants from your entire duct system, not just the registers. We also identify and seal duct leaks that can waste 20–30% of your cooling energy.
We recently upgraded to the Nikro PDC2400 — a certified true HEPA air duct cleaning system that captures 99.97% of airborne particles down to 0.3 microns. All dust, mold spores, and debris dislodged from your ducts is fully contained and removed from your home, not recirculated through it.
The PDC2400 features a lightweight, compact design in a dent-proof, corrosion-resistant polyethylene housing built for residential and commercial use. It meets NADCA Source Removal standards — the only cleaning method proven to fully clean an HVAC duct system.
Negative pressure means all loosened debris flows into the machine. Your furniture, floors, and air are protected throughout the cleaning process.
The HEPA filter captures mold spores, pollen, pet dander, bacteria, and fine dust at 99.97% efficiency — far beyond standard vacuums.
We photograph every duct section before and after cleaning so you have documented proof of the work performed. Transparency is part of every job.
From a full system clean to dryer vent inspection — every service is performed to NADCA standards with the goal of maximising your indoor air quality and HVAC efficiency.
Professional cleaning of all supply and return ducts using the Nikro PDC2400 HEPA system with NADCA-compliant negative pressure. Every duct section is accessed and cleaned — not just the registers. We photograph before and after.
Leaky ducts waste 20–30% of your cooling energy by losing conditioned air into your attic or walls. We locate all leaks with pressure testing and seal them with mastic compound or Aeroseal injection — stopping the waste at the source.
Damaged flex duct sections, crushed runs, disconnected joints, and deteriorated older ductwork are repaired or replaced to restore proper airflow and system efficiency throughout your home.
Florida's humidity creates ideal conditions for mold and bacteria growth inside ductwork. We apply EPA-registered antimicrobial treatments after every cleaning to inhibit re-growth and keep your duct system cleaner between service visits.
A dirty evaporator coil can reduce system efficiency by up to 30% and is a primary source of mold entering your duct system. Our technicians clean coils, blower wheels, blower housing, and drain pans to manufacturer specifications.
Clogged dryer vents are a leading cause of residential house fires in the United States. We clean and inspect the full vent run from the dryer connection to the exterior termination point, restoring proper airflow and reducing fire risk.
Dirty, contaminated ducts harm the health of your family — especially those with asthma, allergies, or existing health conditions. If family members experience unexplained coughing, sneezing, headaches, or nausea at home, your ductwork may be the culprit.
Florida's humidity makes mold growth inside ductwork extremely common. Mold spreads through your entire HVAC system and circulates through the air, causing allergic reactions, persistent odors, and escalating health symptoms. Not all mold grows in visible areas — strange smells are your warning sign.
Dust accumulates in every HVAC system over time. For family members with asthma or allergies, the concentration of fine particles in dirty ductwork significantly impacts comfort and respiratory health, and can worsen symptoms noticeably.
Pet dander is one of the biggest contributors to indoor allergies. If you own pets — or moved into a home that previously had them — your HVAC system may be clogged with hair and dander, continuously recirculating allergens through every room in your home.
Home renovations, drywall cutting, sanding, and insulation work generate fine dust that settles inside ductwork and gets distributed throughout your home for months. A post-renovation duct cleaning is strongly recommended.
Clearwater's warm climate means year-round pollen from grasses, trees, and subtropical plants. Your HVAC system draws outdoor air in — and without regular cleaning, pollen accumulates in ductwork and gets recirculated indoors continuously.
A damp, debris-filled duct environment accelerates bacterial growth. Our EPA-registered antimicrobial treatment applied after cleaning inhibits re-colonisation and protects your household between service visits.
Visible dust blowing from registers when the AC starts up
Musty or stale odor from the vents — even after changing filters
Rooms that are consistently harder to cool or heat than others
Recent home renovation producing drywall or insulation dust
Allergy or asthma symptoms worsening noticeably when at home
More than 5 years since your last professional duct cleaning
Every air duct cleaning follows a structured, NADCA-compliant Source Removal process. No shortcuts. No upselling. Just a thorough clean and an honest assessment.
Your technician inspects all accessible duct sections, registers, the air handler, evaporator coil, and drain pan. We photograph problem areas before work begins so you can see exactly what needs attention.
We connect the Nikro PDC2400 HEPA vacuum to your duct system and establish negative pressure — meaning all air and debris flows into the machine, not back into your home.
Using rotary brushes and compressed-air whips, we dislodge debris from every duct section. The negative-pressure system immediately captures everything in the HEPA filter.
Blower wheel, blower housing, evaporator coil, and drain pan are cleaned to manufacturer specifications. A dirty coil is the primary source of mold entering the duct system.
An EPA-registered antimicrobial agent is applied throughout the duct system to inhibit mold and bacteria re-growth — especially critical in Florida's humid climate.
We show you before-and-after photos, explain any repairs or upgrades we recommend, and answer all questions. No pressure — just honest information so you can make the right decision.
Duct cleaning is not just about the vents. A complete service covers every component of your forced-air heating and cooling system.
Our factory-trained technicians are certified to repair, maintain, and install every major HVAC brand — backed by 25+ years of Clearwater service.
Professional duct cleaning for a typical Clearwater home (3–4 bedrooms) ranges from $350 to $700. Pricing depends on the number of vents, system size, and contamination level. Bayside provides a written estimate before any work begins — no surprise charges.
Due to Florida's year-round humidity and continuous AC operation, we recommend professional duct cleaning every 3–5 years for most homes. Homes with pets, smokers, recent renovations, or allergy sufferers benefit from cleaning every 2–3 years.
Yes. We provide before-and-after photos on every job so you can see exactly what was removed. Most customers notice less dust on surfaces within days, and many report noticeably improved allergy symptoms within weeks.
Absolutely. Debris buildup restricts airflow and forces your HVAC to work harder and run longer. Duct leaks compound the problem by losing conditioned air into unconditioned spaces like your attic. Professional cleaning and sealing typically improves efficiency by 10–25%.
A thorough cleaning for a typical 2,000 sq ft Clearwater home takes 3–5 hours. Larger homes or heavily contaminated systems may take 6–8 hours. We never rush — proper Source Removal takes time.
Yes. The Nikro PDC2400 is a certified true HEPA system that captures 99.97% of airborne particles down to 0.3 microns. All debris dislodged from your ducts is fully contained inside the machine and removed from your home — not recirculated.
Yes, we ask that an adult be present for the initial walkthrough and final review. Most homeowners stay for the first 15 minutes, then go about their day while our team works. We will walk you through our findings and the before-and-after photos at completion.
Whether it's an emergency repair, planned installation or routine tune-up — our team is ready. Fill out the form or call us directly and we'll confirm within 60 minutes.
(727) 669-4300Mon–Fri 8am–6pm | Sat 9am–3pm | Emergency 24/7